Welcome to
Home Appliance Diy
Modules
UNPLUG FROM MAINS. |
Here it is in place. |
On the left is the module access cover ,it pulls out. |
Remove the screws and loosen the wiring,from the clips ,and the module can be moved to the outside of the machine,if a new module is to be fitted then remove the wires one by one and put on and pull off the new board a couple of times to make sure a good connection is established.Then it will have to be programmed unless a good second hand board, off a good machine (it must be the same machine), is to be fitted. |
This is a 3 phase module EVOII.The motor has no brushes.Part number c00254298. |
Another 3 phase module EVOII.Part number c00254409. |
This is an ARCADIA module.Part number c00271242. |
Washerdryer module Part number c00254535. |
If you cannot find what you are looking for or need help then just drop me a message at Appdiy@yahoo.co.uk.