Home appliance diy

General appliance repair tips.

Navigation Elements

Home Washing machines Washing machines.weldedtank Washer dryers Washer dryers.weldedtank Condenser dryers Tumble dryers Dishwashers 3 Kg dryers

Please read the smallprint below ,before accessing this site.

Use caution when repairing electrical appliances ,with the machine always unplugged from the mains supply.

I have been repairing domestic appliance for over 25 years and my knowledge has been recorded on this site .

The information in this site is free for anyone to read as you wish as long as you read and understand the smallprint.

These pages are demonstrations of how i repair various faults.

If you have a problem with your machine let me know and i will try to do a page on it or if you need advice

If you find any bugs on this site please let me know.

Contact me at Appdiy@yahoo.co.uk

Welcome to

Home Appliance Diy

Hotpoint Indesit fault codes

image one F01 . Motor triac short circuit.Check motor,module and wiring.


image two F02 . Motor jammed / tacho detached.Check motor,module and wiring.


image three F03 . Ntc short/open circuit. Check thermister,module wiring.


image four F04 . Pressure switch jammed on empty.Check pressure switch,module.


image five F05 . Pressure switch jammed on full or pump blocked.Check pump and switch.


image six F07 . Heater relay stuck. Check module and heater.


image seven F08 .Heater relay stuck. Check pressure switch,heater,module and wiring.


image eight F09 . Setup error. Check eeprom.


image nine F10 . Pressure switch not sensing.Check pressure switch,module and wiring.



image ten F11 . Pump cannot be activated.Check Pump and wiring.


image eleven F12 . No communication between cards.Check module,top pcb and wiring.


image twelve F13 . High temperature rise in drying.Check fan,heater box for


image thirteen F14 . Dryer heater relay fault.possible open circuit.


image fourteen F17 . Door lock error check door lock module,wiring.


image fifteen F18 .Static light . Fault on control board.Check pcb.