Home Appliance Diy
Hotpoint Indesit condenser dryer capacitor
|
The motor needs a bit of a kickstart so if the drum doesn`t turn (possibly with load in ) then change capacitor.
Unplug from the mains
I Removed 2 screws from lid (shown in picture.)
|
I Pushed lid ( as shown in diagram ) until it moved back , then lifted the lid off . |
|
|
I removed the four screws as shown in the picture.Then removed the screw at the top of the side panel (near the front). |
The side panel will slide to the rear of the machine then lift up to remove . |
|
|
The capacitor is secured by one screw just below it. |
The size of capacitor is measured in uF (micro farads), this one is 8uF.
They are usually between 7uF and 9uF ,except for the 3kg driers which are about 5uf . |
|
If you cannot find what you are looking for or need help then just drop me a message at Appdiy@yahoo.co.uk.